Reflectance confocal microscopy - Consensus terminology glossary in Brazilian Portuguese for normal skin, melanocytic and non-melanocytic lesions

Abstract Background: Currently, there is no uniform and official terminology in Portuguese for reflectance confocal microscopy analysis, despite the increasing number of Brazilian dermatologists using this new tool. Objective: To present the terminology in Brazilian Portuguese for the description of reflectance confocal microscopy and establish the first Brazilian consensus on terms related to normal skin and cutaneous tumors. Methods: 10 Brazilian specialists from different institutions and states of Brazil were selected to evaluate the best corresponding terms in Portuguese for normal skin, melanocytic and non-melanocytic tumors. The terms used were translated from international consensuses in the English language. The modified Delphi method was used to create the consensus in 3 steps. Results: The terms considered the most appropriate in the Portuguese language to describe the findings of normal skin, melanocytic and non-melanocytic lesions in the reflectance confocal microscopy analysis were presented. Study limitations: The limitations of the present study include the number of participants and limited regional representation (only two of the five Brazilian regions were represented). Conclusion: This Brazilian consensus represents an opportunity for dermatologists and physicians specializing in cutaneous oncology to become familiar with reflectance confocal microscopy, propagating the technique in clinical and research environments to stimulate national and international publications on this subject.

Corneal ectasia following photorefractive keratectomy: a confocal microscopic case report and literature review / Ectasia corneana após ceratectomia fotorrefrativa: relato de caso de microscopia confocal e revisão da literatura

ABSTRACT The occurrence of corneal ectasia after photorefractive keratectomy is a rare but serious complication of refractive surgery. Possible risk factors are not well assessed, but a probable reason is the failure to detect keratoconus preoperatively. In this report, we describe a case of corneal ectasia after photorefractive keratectomy in a patient who presented a suspicious tomography pattern preoperatively but had no degenerative alterations associated with pathologic keratoconus, as revealed by in vivo corneal confocal microscopy. We also review eligible case reports of post-photorefractive keratectomy ectasia to find similar characteristics.

RESUMO A ocorrência de ectasia corneana após ceratectomia fotorrefrativa é uma complicação rara, porém grave, em cirurgia refrativa. Os possíveis fatores de risco não são bem avaliados, mas a opinião atual é que a falha na detecção de ceratocone pré-operatório possa ser o principal motivo. Neste relato, descrevemos um caso de ectasia corneana após ceratectomia fotorrefrativa em paciente apresentando padrão tomográfico suspeito no pré-operatório, mas sem alterações degenerativas associadas a ceratocone patológico, conforme revelado por microscopia confocal in vivo da córnea. Além disso, revisamos, na literatura, relatos de casos elegíveis de ectasia pós-ceratectomia fotorrefrativa para encontrar características semelhantes.

Efficacy of ClinproTMXT Varnish surrounding brackets on the enamel surface of white spot lesion

Abstract Orthodontics patients usual develop demineralization and present cavity caries lesions after six months. Minimally invasive procedures have been the goal in modern dental practice. The aim of this study was to evaluate the effect of ClinproTMXT Varnish, on the enamel surface roughness and severity of white spot lesions. Twenty premolars were submitted to bond brackets and experimental induction of demineralization and randomly divided into 2 groups: GI - fluoride varnish (Colgate Duraphat®); GII - Ionomeric Sealant (ClinproTMXT Varnish). The treatment was applied around the brackets. The surface roughness of specimens was analyzed, before treatment and 12 weeks after treatment by laser confocal microscopy, and the severity of the white spot lesion was by laser fluorescence device. The data were analyzed by non-parametric Wilcoxon and Mann-Whitney Test, at 5% significance, roughness percentage reduction was performed. The severity of demineralization decreased in both, GI (p = 0.005) and GII (p = 0.019). Enamel superficial roughness levels decreased in GI and GII. As well as the roughness percentage, being more expressive in the ClinproTMXT Varnish group (85,09%). Colgate Duraphat® or Clinpro™ XT Varnish reduced the severity of the demineralization and decreased the superficial roughness on the enamel. The Clinpro™ XT Varnish was superior to superficial roughness on enamel.

Resumo Pacientes ortodônticos geralmente desenvolvem desmineralização e apresentam lesões de cárie após seis meses de tratamento. Procedimentos minimamente invasivos têm sido o objetivo na prática odontológica moderna. O objetivo deste estudo foi avaliar o efeito do ClinproTM XT selante ionomérico, ao redor do bráquete, com relação a rugosidade superficial do esmalte e a severidade da lesão induzida. Vinte pré-molares foram submetidos a colagem de bráquetes e indução experimental de desmineralização e divididos aleatoriamente em 2 grupos: GI - verniz fluoretado (Colgate Duraphat®); GII - Selante Ionomérico (ClinproTM XT). O tratamento foi aplicado ao redor dos bráquetes. A rugosidade da superfície dos espécimes foi analisada, antes do tratamento e 12 semanas após o tratamento por microscopia confocal a laser e severidade da lesão de mancha branca por dispositivo de fluorescência a laser. Os dados foram analisados pelo teste não paramétrico de Wilcoxon e Mann-Whitney, a 5% de significância. A taxa de redução da lesão foi calculada. A severidade da desmineralização diminuiu tanto no GI (p = 0,005) quanto no GII (p = 0,019). Os níveis de rugosidade superficial do esmalte diminuíram no GI e GII, assim como o percentual de rugosidade, sendo mais expressivo no grupo ClinproTMXT (85,09%). Colgate Duraphat® e Clinpro™ XT reduziram a severidade da desmineralização e diminuíram a rugosidade superficial do esmalte. O selante ionomérico Clinpro™ XT foi superior na redução percentual de rugosidade.

Universal adhesives applied to deep dentin with different bonding treatments / Adhesivos universales aplicados a dentina profunda con diferentes tratamientos de unión

ABSTRACT Eighth-generation adhesives may be applied with total etch, selective-etch or self-conditioning, and serve as primers for non-dental substrates. Aim: To determine the bonding characteristics of universal adhesives applied to the deep pulp wall with different strategies, by means of shear bond strength and laser microscopy. Materials and Method: Cavities 4 mm deep and maximum width were carved in 36 extracted molars. Nine groups were formed according to dental substrate treatment and adhesives, as follows: Total-etch: group 1-Monobond 7 self-etch, group 2-One coat 7 universal, and group 3-Single bond universal; Adamantine etch: group 4-Monobond 7 self-etch, group 5-One coat 7 universal, and group 6-Single bond universal; Self-conditioning: group 7-Monobond 7 self-etch, group 8-One coat 7 universal, and group 9-Single bond universal. Molars were filled following the manufacturer's instructions. Three specimens per group (27 altogether) were used to determine shear bond strength using a universal testing machine, while layer thicknesses were measured on the remaining specimens using microscope images and Olympus LEXT 3D Software. Analysis of variance was used to compare data. Results: Mean (standard deviation) bond strength in megapascals (MPa) was: group 1: 7.06±3.01; group 2: 10.74±4.36; group 3: 8.20±3.92; group 4: 7.41±2.23; group 5: 6.84±1.50; group 6: 5.86±2.10; group 7: 5.83±1.94; group 8: 7.14±2.37; group 9: 8.06±3.51. Bond strength was higher (p=0.049) for total-etch (8.61±3.96) than for selective etch (6.71±1.98) and self-conditioning (6.91±2.68). No significant difference was found among the three adhesives (p=0.205). Adhesive layer in micrometers (μm) was total-etch 8.71±4.93, selective etch 5.49±1.70 and self-conditioning 6.27±3.01, with no significant difference. Conclusions: There were significant differences among bonding strategies, with the highest values for total-etch. No significant difference was observed between self-conditioning and selective etch. No significant difference was found among the adhesives, which all behaved similarly. The greatest adhesive layer thicknesses were recorded in the total-etch group, with no significant difference among the various adhesive approaches.

RESUMEN Los adhesivos universales de octava generación pueden ser aplicados con diferentes estrategias de unión: grabado total, grabado selectivo o autoacondicionamiento. Además, imprimen sustratos no dentales. Objetivo: Determinar las caracteristicas de unión de adhesivos universales con diferentes estrategias en pared pulpar profunda mediante resistencia adhesiva al corte y microscopía laser. Materiales y Método: En 36 molares se tallaron cavidades de 4 mm de profundidad y ancho máximo. Se dividieron en 9 grupos según tratamientos y adhesivos. Grabado total: grupo 1-Monobond 7 self-etching, grupo 2-One coat 7 universal y grupo 3-Single bond universal; Grabado selectivo: grupo 4-Monobond 7 self-etching; grupo 5-One coat 7 universal y grupo 6-Single bond universal y Autoacondicionamiento: grupo 7-Monobond 7 self-etching; grupo 8-One coat 7 universal y grupo 9-Single bond universal. Las obturaciones se realizaron siguiendo las instrucciones del fabricante. La resistencia adhesiva al corte se determinó utilizando una máquina de ensayo universal sobre 27 especímenes mientras que los restantes fueron empleados para evaluar los espesores de la capa generado sobre imágenes obtenidas con microscopía y con el software Olympus LEXT 3D. Se ultilizó análisis de varianza. Resultados: Resistencia adhesiva en megapascal (MPa) media (desviación estándar): grupo 1: 7,06±3,01; grupo 2: 10,74±4,36; grupo 3: 8,20±3,92; grupo 4: 7,41±2,23; grupo 5: 6,84±1,50; grupo 6: 5,86±2,10; grupo 7: 5,83±1,94; grupo 8: 7,14±2,37; grupo 9: 8,06±3,51. Grabado total (8,61±3,96) registró los valores mayores (p=0,049) en comparación a grabado selectivo (6,71±1,98) y autoacondicionamiento (6,91±2,68). Los adhesivos no tuvieron diferencias significativas (p=0,205). Capa adhesiva en μm: Grabado total (8,71±4,93); grabado selectivo (5,49±1,70) y autoacondicionamiento (6,27±3,01) sin diferencias significativas (p=0,073). Conclusiones: Las estrategias de unión mostraron diferencias significativas; los valores más altos se obtuvieron con grabado total y entre autoacondicionamiento y grabado selectivo no hubo significancia. Los adhesivos evidenciaron comportamientos similares sin registrar diferencias significativas. Los mayores espesores de capa fueron con grabado total sin diferencias significativas entre las técnicas.

The skin through reflectance confocal microscopy -Historical background, technical principles, and its correlation with histopathology

Abstract Since its first introduction into medical practice, reflectance confocal microscopy (RCM) has been a valuable non-invasive diagnostic tool for the assessment of benign and malignant neoplasms of the skin. It has also been used as an adjunct for diagnosing equivocal cutaneous neoplasms that lack characteristic clinical or dermoscopic features. The use of RCM has led to a decreased number of biopsies of benign lesions. Multiple published studies show a strong correlation between RCM and histopathology thereby creating a bridge between clinical aspects, dermoscopy, and histopathology. Dermatopathologists may potentially play an important role in the interpretation of confocal images, by their ability to correlate histopathologic findings. RCM has also been shown to be an important adjunct to delineating tumoral margins during surgery, as well as for monitoring the non-surgical treatment of skin cancers. Advanced technology with smaller probes, such as the VivaScope 3000, has allowed access to lesions in previously inaccessible anatomic locations. This review explains the technical principles of RCM and describes the most common RCM features of normal skin with their corresponding histological correlation.

Corneal confocal microscopy and its application in ischemic cerebrovascular disease / 国际脑血管病杂志

Corneal confocal microscopy (CCM) is an in vivo corneal imaging technique, which can directly quantify corneal nerve fibers in real time. It has the characteristics of non-invasive, objective and high sensitivity. CCM can not only be used for the diagnosis and treatment evaluation of corneal diseases, but also plays an important role in the diagnosis and prognosis evaluation of some peripheral and central nervous system diseases, such as diabetes peripheral neuropathy and Parkinson's disease. In addition, the changes of corneal nerve fibers can indirectly reflect the severity of ischemic cerebrovascular disease, and it is expected to become a noninvasive bioimaging marker of ischemic cerebrovascular disease. This article reviews CCM and its application in ischemic cerebrovascular disease, in order to provide better means for early diagnosis and prognosis evaluation of ischemic cerebrovascular disease.

Endodontic cement penetration after removal of calcium hydroxide dressing using XP-endo finisher

Abstract: We aimed to evaluate the penetration of endodontic cement following the removal of calcium hydroxide (Ca(OH)2) dressing using the XP-endo Finisher in association with different irrigating solutions. Sixty premolars were instrumented and applied with a Ca(OH)2 dressing. To remove Ca(OH)2, the teeth were divided into six groups, each with a different volume of sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA), as well as solution stirring time with XP-endo Finisher (0, 30, and 60 sec). Root canals were filled using the lateral condensation technique. Fluorescein dye was added to the cement for microscopic laser scanning analysis. In the generated images, linear measurements were taken in micrometers, and their averages were calculated. To analyze the perimeter penetration ratio of the cement, the total perimeter of the canal and the segment of the total perimeter of the canal where the endodontic cement penetrated into the dentinal tubules were measured in micrometers. We found that using an XP-endo Finisher in irrigation was more effective than using a needle and syringe during the extension and penetration of endodontic cement. Shaking with XP-endo Finisher with 17% EDTA increased the extent and perimeter of the penetration of the endodontic cement into the dentinal tubules. However, using the XP-endo Finisher with EDTA only was more efficient than using the instrument interchangeably in NaOCl and EDTA. Although XP-endo Finisher contributes to the removal of Ca(OH)2, none of the protocols or instruments used removed all Ca(OH)2 from the root system.

Corneal confocal microscopy detects small-fiber neuropathy in patients with amyotrophic lateral sclerosis / 中华内科杂志

Objective:To investigate small fiber neuropathy in patients with amyotrophic lateral sclerosis (ALS) by corneal confocal microscopy.Methods:A total of 57 ALS patients were consecutively enrolled in Department of Neurology between June 2015 and February 2016, including 37 men and 20 women with mean age 24-80 (52±11)?years. There were 30 controls including 21 men and 9 women with mean age 23-76 (55±13) years. All subjects underwent corneal confocal microscopy (CCM), contact heat evoked potential (CHEP) and skin sympathetic reflection (SSR) to quantify small nerve fiber pathology. Four parameters, such as nerve fiber length (NFL), nerve branch density (NBD), nerve fiber density (NFD) and nerve fiber tortuosity (NFT) were assessed by corneal confocal microscopy. All statistical calculations were conducted using SPSS version 12.0.Results:Compared with control group, corneal nerve fiber length (NFL),nerve fiber density (NFD) were significantly decreased [(12.2±4.4)mm/mm 2 vs.(15.1±4.5) mm/mm 2, P=0.028;(50.8±24.0)/mm 2 vs. (68.3±16.4)/mm 2, P=0.002],and nerve fiber tortuosity (NFT) were significantly increased [(2.6±1.0)level vs.(1.0±0.5)level, P<0.01)] in SFN group, while nerve branch density (NBD) were comparable ( P=0.700).The course of disease is correlated with NFT ( r=0.25, P=0.030). Conclusions:CCM is a new sensitive noninvasive clinical technique that detects early small fiber nerve damage in patients with ALS.

Analysis of the positive rate of scanning laser ophthalmoscope in the retromode for different types of diabetic macular edema / 中华眼底病杂志

Objective:To explore the positive rate of scanning laser ophthalmoscope in the retromode (RM-SLO) in different types of diabetic macular edema (DME), and to analyze its correlation with foveal thickness (CMT) and macular volume.Methods:From March to May 2021, 40 patients (65 eyes) were diagnosed as DME by fundus examination combined with optical coherence tomography (OCT) in Affiliated Eye Hospital of Wenzhou Medical University at Hangzhou were included in the study. All eyes underwent best corrected visual acuity (BCVA), OCT and RM-SLO fundus imaging examinations, 47 eyes underwent fluorescein fundus angiography (FFA) examination. RM-SLO fundus imaging examinations were performed with Mirante SLO, including retro mode illumination deviated right (RMDR) and retro mode illumination deviated left (RMDL). If one or more of the RMDR and RMDL of the examined patient can identify macular edema, RM-SLO was considered to be able to identify macular edema. The macular volume at CMT and 6 mm from the fovea was measured by OCT software. DME were divided into 3 types based on OCT images: diffuse retinal thinkening (DRT) type; cystoid macular edema(CME) type; serous retinal detachment (SRD) type, focal leakage type, diffuse leakage type and diffuse cystic leakage type. The consistency of RMDR and RMDL in the diagnosis of DME in RM-SLO fundus imaging was evaluated, as well as their positive rate in different classifications of DME. The correlation between the detection of macular edema by RM-SLO and the DME type, CMT and foveal volume, and the correlation between BCVA and edema type, CMT and macular volume were analyzed.Results:Among 65 eyes, the positive rates of RMDR and RMDL fundus imaging to detect DME were 46 (70.77%, 46/65) and 48 (73.85%, 48/65), respectively. There was good consistency in identifying DME (Kappa value=0.770; P<0.001). The positive rates of RMDR and RMDL fundus imaging DRT, CME and SRD type of DME were 42.11% (8/19), 57.89% (11/19), 77.78% (28/36), 77.78% (28/36), 100.00% (10/10), 90.00% (9/10), respectively. In the FFA classification of them, the positive rates of focal leakage, diffuse leakage and diffuse cystic leakage were 68.75% (11/16), 62.50% (10/16), 68.00% (17/25), 76.00% (19/25), 100.00% (6/6), 100.00% (6/6), respectively. The results of Spearman correlation analysis showed that whether RM-SLO could identify DME was associated with CMT and OCT classification ( r=0.310, 0.365; P=0.120, 0.003); there was no correlation between FFA classification and macular volume ( r=0.113, 0.117; P=0.449, 0.352). BCVA was correlated with CMT and macular volume ( r=0.307, 0.269; P=0.013, 0.030), however, there was no significant correlation with OCT type, angiographic type ( r=0.051, 0.175; P=0.684, 0.240). Conclusion:The diagnostic agreement of DME are good between RMDR, RMDL of RM-SLO image. DME of DRT type and patients with smaller CMT in OCT are difficult to identified by RM-SLO fundus imaging.

Dentin bond strength evaluation between a conventional and universal adhesive using etch-and-rinse strategy

Aim: The aim of this study was to compare the microtensile bond strength (µTBS) and the characteristics of the adhesive interface of Scotchbond Universal - SU ­ etch-and-rise mode (3M ESPE) and Adper Scotchbond Multi-Purpose - MP (3M ESPE) to dentin over time. Methods: Class I cavity preparations were performed in 60 human molars that were randomly divided according to the dentin bonding system (DBS) used (n=30): (1) Acid conditioning + SU and (2) Acid conditioning + MP. For bonding strength (BS) analysis, 30 teeth (n = 15) were sectioned into sticks and submitted to the microtensile test in a universal testing machine after 24 hours and 12 months. The adhesive interface of the others 30 teeth was analyzed in a confocal microscope after 24 hours and 12 months. The data of µTBS were analyzed by two-way repeated measures ANOVA and Tukey's HSD (α = 0.05). Results: SU presented the lowest DBS compared to MP (p=0.000). Time did not influenced DBS for both adhesive systems (p=0.177). Confocal microscopy analysis showed no cracks between both adhesive systems tested. Conclusion: The results indicate that MP - µTBS showed a better performance compared to SU in total-etch mode

Effect of ethanol-conditioned dentine on sealer penetration into dentinal tubules: a confocal microscopy study

Aim: The aim of this study was to evaluate the effect of ethanol-conditioned dentin on endodontic sealer penetration into dentinal tubules by confocal laser scanning microscopy (CLSM). Methods: Forty human maxillary anterior teeth were instrumented and divided into four groups (n = 10) according to the drying methods: 1) wet: vacuum only, 2) paper points: vacuum + absorbent paper points, (3) 70% ethanol: 70% ethanol (1 min) + vacuum + absorbent paper points, and (4) 100% ethanol: 100% ethanol (1 min) + vacuum + absorbent paper points. All root canals were filled with resin-based endodontic sealer. Four sections from each third (cervical, middle, and apical) were examined by CLSM. Root canal wall perimeter infiltrated by sealer, maximum depth of sealer penetration, percentage of penetrated area, and fluorescence intensity of rhodamine B were measured. Statistical analysis was performed by analysis of variance and Tukey's tests (α = 0.05). Results: No statistical difference was found when percentage of root canal wall coverage infiltrated by sealer were compared. The groups in which ethanol solutions were used presented greater depth of sealer penetration, higher percentage of penetrated area, and higher fluorescence intensity of rhodamine B (p< 0.05) when compared with the wet and paper point groups. Overall, 100% ethanol produced better results than 70% ethanol, except for rhodamine B intensity (cervical third). In addition, the absorbent paper points drying method behaved better than did vacuum only group, except for rhodamine B intensity (apical third). Conclusion: Ethanol-conditioned dentin improved the penetration of resin-based sealer into dentinal tubules, especially at the concentration of 100%

Adaptación marginal de coronas de disilicato de litio obtenidas mediante técnicas de escaneo (CAD/CAM): análisis in vitro con microscopía confocal / Marginal adaptation of lithium disilicate crowns obtained by scanning techniques (CAD/CAM): in vitro confocal microscopy analysis

Objetivo. El objetivo de este estudio fue evaluar la adaptación marginal de coronas de disilicato de litio obtenidas mediante técnicas de escaneo (CAD/CAM), antes y des- pués de la cristalización, a través de análisis in vitro con microscopía confocal (MC). Métodos. Fueron confeccionadas 16 réplicas en poliuretano a partir de la pieza 1.4, de modelo typodont, tallada para corona total. Las réplicas fueron divididas en dos gru- pos, de acuerdo a la técnica de escaneo: Técnica Indirecta (Grupo IND, n=08), donde modelos de yeso fueron escaneados con escáner de laboratorio (inEos X5, Sirona Den- tal Systems) y Técnica Directa (Grupo DIR, n=08), donde modelos typodont fueron escaneados con escáner intraoral (CEREC BlueCam, Sirona Dental Systems). A seguir, se fresaron (inLab MC XL, Sirona Dental Systems) coronas en disilicato de litio (IPS e.max CAD, Ivoclar Vivadent) y se adaptaron a las réplicas. Se evaluó la adaptación marginal con análisis de MC en dos momentos, antes y después de la cristalización del disilicato de litio. Los datos fueron analizados con la prueba de Mann-Whitney, t de Student y Wilcoxon (α= 0,05). Resultados. Hubo una diferencia estadísticamente significativa en la adaptación marginal horizontal entre los grupos IND y DIR después de la cristalización (p=0,05). En el grupo IND, la comparación de la adaptación mar- ginal vertical antes y después de la cristalización mostró una diferencia estadísticamente significativa (p=0,038). Conclusiones. Las coronas de disilicato de litio obtenidas me- diante escaneo directo (CAD/CAM) presentaron menor desajuste marginal vertical. La etapa de cristalización afectó la adaptación marginal de las coronas.

Objective. This study aimed to evaluate lithium disilicate marginal adaption on crowns by scanning techniques (CAD/CAM), before and after crystallization, through confocal microscopy (CM) in vitro analysis. Methods. Sixteen polyurethane replicas were per- formed from tooth 1.4, of a typodont model, prepared for a full crown. The replicas were divided into two groups, according to the scanning technique: Indirect Technique (Group IND, n=08), where dental stone models were scanned with a laboratory scanner (inEos X5, Sirona Dental Systems) and Direct Technique (Group DIR, n=08), where typodont models were scanned with an intraoral scanner (CEREC BlueCam, Sirona Dental Systems). Then, the lithium disilicate crowns (IPS e.max CAD, Ivoclar Vivadent) were milled (inLab MC XL, Sirona Dental Systems) and adapted to the replicas. Margin- al adaptation was evaluated with CM analysis before and after lithium disilicate crystalli- zation. Data were analyzed with the Mann-Whitney, t test, and Wilconxon test (α=0.05). Results. There was a statistically significant difference in horizontal marginal adaptation between IND and DIR groups after crystallization (p=0.05). In IND group, the compar- ison of vertical marginal adaptation before and after crystallization showed a statistically significant difference (p=0.038). Conclusions. Lithium disilicate crowns obtained by direct scanning technique (CAD/CAD) showed less vertical marginal maladjustment. The crystallization stage affected the crown's marginal adaptation.

Reflectance confocal microscopy-assisted surgical treatment for two cases of extramammary Paget′s disease of the vulva / 中华皮肤科杂志

In order to develop a method to more accurately determine the surgical boundary of extramammary Paget′s disease, reflectance confocal microscopy was used to determine the tumor boundary followed by modified extended excision in 2 cases of pathologically diagnosed extramammary Paget′s disease of the vulva. No residual tumor was observed in the resection margins by postoperative pathological examination at 4 positions (12, 3, 6 and 9 o′clock) , and follow-up showed no recurrence 1 year later.

Can composition and preheating improve infiltrant characteristics and penetrability in demineralized enamel?

Abstract The composition of infiltrants can influence their physical properties, viscosity and depth of penetration (DP). Strategies are used to increase the DP, such as the addition of diluents or the use of heat. This study aimed to evaluate the effect of preheating and composition on physical properties and DP of infiltrants in demineralized enamel. The groups were assigned, and the following experimental formulations were made: 25%BisEMA +75%TEGDMA; 25%BisEMA +65%TEGDMA +10%ethanol; 25%BisEMA +65%TEGDMA +10%HEMA; 100%TEGDMA; 90%TEGDMA +10%ethanol; 90%TEGDMA +10%HEMA. The samples were photoactivated at two temperatures (25°C and 55°C). Degree of conversion (DC) was performed using an infrared spectrophotometer. Elastic modulus (E), flexural strength (FS) and contact angle (CA) tests were also performed. The DP of an infiltrant in demineralized enamel was determined by confocal laser scanning microscopy (CLSM) using an indirect labeling technique. The data were analyzed by two-way ANOVA and Tukey's test. DC increased after preheating in all the groups; however, 90%TEGDMA+10%ethanol showed the lowest DC for both temperatures, and the lowest E. Preheating did not influence E or FS. The CA increased at 55°C for most groups, but decreased for groups containing HEMA. Temperature did not seem to influence DP, and Icon showed the lowest DP values. The 100%TEGDMA composition showed more homogeneous penetration, whereas Icon showed heterogeneous and superficial penetration. The preheating technique does not improve all properties in all the material compositions. The composition of a material can influence and improve its properties.

Analysis of imaging characteristics of trichoepithelioma / 中华皮肤科杂志

Objective To investigate dermoscopic,reflectance confocal microscopic (RCM) and histopathological features of trichoepithelioma.Methods A total of 23 outpatients with histopathologically confirmed trichoepithelioma were enrolled from Department of Dermatology,Wuhan No.1 Hospital between January 2017 and December 2018.Dermoscopic and RCM images were collected,and the consistency was analyzed between dermoscopic or RCM features and histopathological features.Results Among the 23 patients,5 were male,and 18 were female.Their age was 39.5 ± 22.1 years.Histopathological examination showed that the tumor was well-circumscribed and surrounded by abundant fiber matrices,consisted of many basaloid cells forming clusters or interlacing cords with surrounding cells arranged in a fence-like pattern.Tumor cells differentiated into dermal papilla cells to different extents,and varying amounts of keratinous cysts were observed.RCM showed bud-like downward extension of cord-like cells at the dermoepidermal junction in 8 patients,which tended to be arranged in a fence-like pattern;seemingly lobulating nodular tumor masses were scattered in the dermis in 18 patients,which appeared as extended hypoechoic structures,with no constriction gap between tumor masses and surrounding tissues;tumor masses were surrounded by moderately to highly refractive amorphous substance in 16 patients;characteristic hair papilla structures suspected to be derived from primary differentiation were observed in 16 patients;keratinous cysts were clearly observed in 20 patients.Dermoscopy clearly showed that homogeneous pearlwhite structures in 20 patients,and linear telangiectasia in 10 patients.Conclusion RCM features of trichoepithelioma are highly consistent with its histopathological features,so reflectance confocal microscopy can serve as an efficient method for auxiliary and differential diagnosis.

Microscopia confocal no auxílio diagnóstico de Distrofia Corneana de Schnyder / In vivo confocal microscopy as a diagnostic tool in Schnyder Corneal Dystrophy's case

Resumo Neste relato, descrevemos um caso de Distrofia corneana de Schnyder que apresentou o desfecho de seu diagnóstico baseado em achados característicos na microscopia confocal, ferramenta que se aponta em destaque no universo oftalmológico.

Abstract Schnyder's corneal dystrophy (SCD) is a rare corneal condition characterized by cholesterol and phospholipids deposition in the stroma and Bowman's layer. We present a case report of a patient who had a progressive corneal stromal haze in both eyes since he was 15 years old. Etiological diagnosis of SCD was well established by In Vivo Confocal Microscopy (IVCM).

The effect of panretinal photocoagulation on confocal laser scanning ophthalmoscopy and stereo photographic parameters of optic disk topography in patients with diabetic retinopathy / Efeito da panfotocoagulação retiniana na oftalmoscopia confocal de varredura a laser e parâmetros da estereofotografia do disco óptico em pacientes com retinopatia diabética

ABSTRACT Purpose: To determine the effect of panretinal photocoagulation on optic disk topographic parameters in non-glaucomatous patients with proliferative diabetic retinopathy. Methods: This was a prospective, single-center, observational study. Thirty-eight eyes of 26 patients with diabetes underwent panretinal photocoagulation for proliferative diabetic retinopathy. Stereoscopic disk photographs and optic nerve head parameters were evaluated using the Zeiss fundus camera and the confocal scanning laser ophthalmoscope (Heidelberg Retinal Tomograph), respectively, at baseline and 12 months after the completion of panretinal photocoagulation. Results: Thirty-eight eyes of 26 patients (15 female) with a mean age of 53.7 (range 26-74) years were recruited. No significant difference was found between the stereo photography determined mean horizontal and vertical cup-to-disk ratio before and after panretinal photocoagulation treatment (p=0.461 and 0.839, respectively). The global values of the optic nerve head parameters analyzed with the HRT3 showed no significant change from baseline to 12 months, including the disk area, cup area, rim area, cup volume, rim volume, cup-to-disk area ratio, linear cup-to-disk ratio, mean cup depth, maximum cup depth, cup shape measure, height variation contour, mean retinal nerve fiber layer thickness, and cross-sectional area. Conclusion: Our results suggest that panretinal photocoagulation does not cause morphological optic disk changes in patients with diabetic proliferative retinopathy after 1 year of follow-up.

RESUMO Objetivo: Determinar o efeito da panfotocoagulação retiniana nos parâmetros topográficos do disco óptico em pacientes não glaucomatosos com retinopatia diabética proliferativa. Métodos: Este é um estudo observacional pros­pectivo e unicêntrico. Trinta e oito olhos de 26 pacientes dia­béticos foram submetidos à panfotocoagulação retiniana para retinopatia diabética proliferativa. As estereofotografias e os parâmetros do disco óptico foram avaliados usando o retinógrafo Visucam da Zeiss e o oftalmoscópio confocal de varredura a laser (Heidelberg Retinal Tomograph), respectivamente, no início e 12 meses após a conclusão da panfotocoagulação. Resultados: Trinta e oito olhos de 26 pacientes (15 mulheres) com média de idade de 53,7 anos (intervalo de 26-74) foram recrutados. Nenhuma diferença significativa foi encontrada entre a média horizontal e vertical para relação escavação/disco óptico determinadas pelas estereo­fotografias antes e após o tratamento com panfotocoagulação retiniana (p=0,461 e 0,839, respectivamente). Os valores globais dos parâmetros do disco óptico analisados com a tomografia de varredura a laser não mostraram nenhuma mudança significativa entre o início até os 12 meses, incluindo disk area, cup area, rim area, cup volume, rim volume, C/D area ratio, linear C/D ratio, mean cup depth, maximum cup depth, cup shape measure, height variation contour, mean retinal nerve fiber layer thickness e cross-sectional area. Conclusão: Nossos resultados sugerem que a panfotocoagulação retiniana não causa alterações morfológicas no disco óptico em pacientes com retinopatia diabética proliferativa após um ano de seguimento.

In-vivo assessment of a case of cutaneous sarcoidosis using reflectance confocal microscopy

Abstract: Reflectance confocal microscopy (RCM) is a noninvasive imaging technique that allows visualization of the epidermis and papillary dermis with cellular-level resolution. Granulomatous reactions such as sarcoidosis could be assessed using RCM. The identification of bright beaded-like structures that could correspond to reticulin fibers overlying granulomas, in association with dermoscopy, may be a very useful approach in the diagnosis of sarcoidosis and for the differentiation of this granulomatous entity with superficial cutaneous metastasis.

O uso da terapia fotodinâmica com aminolevulinato de metila e luz do dia para tratamento de queratoses actínicas / The use of photodynamic therapy with methyl aminolevulinate and daylight for the treatment of actinic keratoses

Introdução: A queratose actínica (QA) é lesão pré-maligna que pode progredir para carcinoma espinocelular. O diagnóstico é clínico, dermatoscópico e por microscopia confocal. Atualmente, aborda-se o tratamento do campo cancerizável, abrangendo QAs clinicamente visíveis e subclínicas, sendo a terapia fotodinâmica (PDT) uma opção terapêutica. Objetivo: Avaliar melhora das QAs e campo cancerizável em pacientes submetidos a PDT com luz do dia, com análise clínica, dermatoscópica e por microscopia confocal. Métodos: Foram selecionados dez pacientes, com múltiplas QAs na face. Realizada a PDT utilizando luz do dia com aminolevulinato de metila e feita documentação fotográfica clínica, dermatoscópica e por microscopia confocal antes do tratamento e 60 dias após seu início. Resultados: Dos nove pacientes que completaram o tratamento, oito (88,8%) apresentaram melhora clínica e regressão no grau da QA com uma sessão. Na dermatoscopia, quatro pacientes (44,4%) apresentaram melhora significativa, três pacientes (33,3%) apresentaram melhora parcial e dois pacientes (22,2%) tiveram suas lesões estáveis. Na microscopia confocal, seis (66,6%) pacientes tiveram regressão no grau da lesão. Conclusões: A PDT com luz do dia se mostrou eficaz para tratamento de QAs, apresentando alto grau de tolerabilidade e eficácia, além de bom perfil de segurança.

Introduction: Actinic keratosis (AK) is a pre-malignant lesion that can progress to squamous cell carcinoma. The diagnosis is through clinical, dermatoscopic and confocal microscopy assessment. Currently, the approach is the treatment of the field cancerization, comprising of clinically visible and subclinical AKs, for which photodynamic therapy (PDT) is a therapeutic option. Objective: To evaluate improvement of AKs and cancerization field in patients submitted to daylight PDT, with clinical, dermatoscopic and confocal microscopy assessment. Methods: Ten patients with multiple AKs on the face were selected. Daylight PDT was performed using methyl aminolevulinate and clinical, dermatoscopic and confocal microscopy photographic documentation was performed before and 60 days after the treatment. Results: Of the nine patients who completed the treatment, 8 (88.8%) showed clinical improvement and reduction in the severity of AK with one treatment. On dermatoscopy, 4 patients (44.4%) showed significant improvement, 3 patients (33.3%) showed partial improvement and 2 patients (22.2%) had no change. On confocal microscopy, 6 (66.6%) patients presented reduction in the severity of the lesion. Conclusions: Daylight PDT proved to be effective for the treatment of AKs, with high tolerability and efficacy, besides a good safety profile.

The clinical applications of adaptive optics scanning laser ophthalmoscope / 中华眼底病杂志

Adaptive optics (AO) is a technique to improve the performance of optical systems by reducing the influence of optical aberrations. Combined with scanning laser ophthalmoscope (AOSLO), the aberration of human refractive system can be corrected. Thus, the resolution and quality of imaging can be greatly improved to the cellular level in vivo retina (such as photoreceptor, nerve fibers, vascular parietal cell), therefore the earlier changes of the diseases can be detected. At the same time, microstructure changes of retinal can also be observed during the follow-up of the disease. Due to inherent technical defects of AOSLO, its wide application in clinical practice is limited. With the continuous progress of AO technology and the further improvement of related software functions, the function of the system will become more stronger and will play a more and more important role in scientific research and clinic.